Gauteng ยท Vetted local plumbers

My geyser burst: what to do in the first ten minutes

Switch off the geyser at the DB, close the water, and open the hot taps. Do these in that order and the damage stops growing.

Covers
Johannesburg, Pretoria, Ekurhuleni, the West Rand and the Vaal
You pay
Nothing to be put in touch
Price
Quoted before work starts

Safety first: the electrical side

Switch off the geyser isolator on the DB board before anything else. Water and a live element are dangerous together.

If the DB is wet, or you would have to stand in water to reach it, do not go near it. Call an electrician or your landlord or body corporate, and stay out of the wet area.

Do not switch the geyser back on, even if the leak seems to have stopped. A geyser with a split tank is finished, and running the element dry can cause a fire or damage the wiring. Leave the isolator off until a plumber has dealt with it.

Stop the water

Close the main water valve for the house. Then close the geyser's own inlet valve if you can reach it.

Open all the hot taps in the house. This relieves the pressure and lets the tank empty down the pipes instead of through the ceiling.

Once the tank has emptied, check the rest of the house for water in places you cannot see, such as the ceiling void and light fittings. If a light fitting is full of water, do not switch it on. Leave it for an electrician to dry out and test.

Protect what you can

Move furniture, rugs and valuables out of the water path. Lift anything electrical off the floor.

If the ceiling is bulging with water, do not stand under it. A heavy ceiling can drop. Leave anything involving the ceiling to the plumber or an electrician.

Keep children and pets out of the room. Hot water from a burst tank can scald, and wet floors are slippery, especially tiles. Wear closed shoes if you need to walk through the wet area.

Do not use a wet-and-dry vacuum near electrical sockets until the power in that area has been checked.

Document before you clean

Take photos and short video of the geyser, the ceiling and every damaged item. Keep any damaged parts of the geyser, because an assessor may want to see them. Write down the time it happened and what you did.

Do this before you mop up. If you are insured, the details will matter. The guide on insurance claims covers how that usually works.

Who to call

If you are insured, call your insurer or broker first. Many have a 24-hour incident line and arrange an accredited plumber, and a registered plumber is often a condition of the claim.

If you are not insured or want someone nearby straight away, message us your suburb. We pass the job to a local plumber, who comes to look and gives a quote before starting any work.

If the geyser is old, ask the plumber whether the tank is the only problem. A burst is sometimes caused by a failed valve that let pressure build, and a new geyser with the same faulty valve will burst again.

The job behind this: Burst geyser and insurance claims.

Questions people ask

Should I turn the water off at the geyser or the mains?

Do both if you can. The mains valve stops water to the whole house. The geyser's own inlet valve isolates just the geyser so you can restore water to the rest of the house.

Why open the hot taps?

It lowers the pressure and drains the hot water out of the tank through the pipes, which reduces the amount escaping into the ceiling.

Can I use the house water while the geyser is off?

Yes, once the geyser's inlet is closed and the mains is open again. Do not switch the geyser back on until a plumber has checked it.

Related problems

All common problems →

Tell us what is wrong

Takes under a minute. A plumber near your area phones you back and quotes before any work starts. There is nothing to pay to be put in touch.