Smell and feel first
A damp, musty smell in a room with no visible water is one of the earliest clues. Moisture is probably sitting in a wall or under the floor.
Walk the room barefoot if you can. A spot that feels warm can mean a hot water pipe is leaking underneath. A soft or spongy spot can mean the floor material is soaked.
Keep a note of when you first noticed it, and whether it gets worse after you use a particular tap, shower or the geyser. A leak on a hot pipe tends to appear after hot water use, while a leak on a cold line is constant.
Sound is another clue. In a quiet house, a faint hiss, trickle or tick from inside a wall means water is moving where it should not.
What the walls and floors show
Hidden leaks leave marks over days or weeks. Look for:
- Paint that bubbles, flakes or stains on the lower part of a wall.
- Skirting boards that swell or lift.
- Tiles that loosen or sound hollow, or grout that keeps going dark.
- Laminate or wooden floors that cup, lift or open at the seams.
- Mould that returns after you clean it.
- Stains on a ceiling below a bathroom or kitchen.
Confirm with the meter
The meter test is the quickest way to tell a real leak from damp caused by something else. Switch off all water use, read the meter, wait an hour and read it again. If the number moved, water is escaping.
If the meter is still, the damp may come from rain getting in, a roof leak, rising damp or condensation. Those need a different fix.
Another quick check is to look at the cold and hot lines separately. If the damp patch is near a bathroom wall and grows after showers, the shower mixer or the pipe behind it is a likely suspect. A patch that stays the same size all day suggests a constant leak on a supply pipe.
What not to do
Do not break open tiles or walls to look. You may miss the leak and cause more damage. Do not leave a leak running for weeks while you wait and see, because water spreads and can damage the floor structure and electrical wiring.
If water is near plug points or the DB board, keep away and call an electrician. Do not stand in water to reach the DB.
How a plumber finds it
Plumbers use moisture meters, listening equipment and pressure tests to find the exact spot. That lets them open a small section of wall or floor, not the whole room.
Tell us your suburb and what you have noticed, and we will put you in touch with a local plumber. They look at the problem and quote before any work starts.
The job behind this: Leak detection.