Gauteng ยท Vetted local plumbers

How to check for a hidden water leak with your water meter

Close every tap, then watch the meter. If it still moves while nothing is running, water is escaping somewhere on your property.

Covers
Johannesburg, Pretoria, Ekurhuleni, the West Rand and the Vaal
You pay
Nothing to be put in touch
Price
Quoted before work starts

Find the meter and get ready

Most meters sit in a box near the street boundary. Lift the lid carefully and wipe the glass. Many meters have a small dial or star that turns when any water flows, even a trickle.

Take a photo of the reading with the date visible. The City of Johannesburg suggests this in its advice on high bills, because it helps if you need to query an account later.

The meter test

Do this when nobody is home or at a quiet time.

A common mistake is forgetting the small users. A geyser that refills after someone used hot water, a pool filler, a drip irrigation line or a cistern that tops itself up will all move the meter. Check for these first so you do not chase a leak that is not there.

  • Close all taps and make sure no one flushes a toilet.
  • Switch off the washing machine, dishwasher, irrigation and any pool top-up.
  • Read the meter and write the number down. Note the small dial too.
  • Wait at least an hour without using any water. Overnight is even better.
  • Read the meter again. If the number changed or the small dial is still turning, you have a leak.

If the meter moves, narrow it down

Close the main valve at the house, if you have one. If the meter stops, the leak is in the house pipes. If it keeps moving, the leak is between the meter and the house, often an underground pipe.

Check the toilets first. A leaking cistern is the most common cause and is silent. Put a few drops of food colouring in the cistern and do not flush for 15 minutes. If colour shows in the bowl, the cistern is leaking into the pan.

An underground leak often shows above ground. Look for a patch of lawn that is greener or wetter than the rest, a damp strip along a path, or a soft spot in the soil near the meter or the house wall. A hissing sound near the main pipe with everything off is another clue.

Outside taps and hosepipes also leak at the connection. Check them before you look anywhere else.

Whose leak is it?

The City of Johannesburg says leaks on its meter or outside your boundary should be reported to it straight away. Leaks inside your boundary are the owner's responsibility, and a plumber should repair them. Other municipalities have similar rules, so check with yours.

Also look at the bill itself. Check whether it is based on an actual reading or an estimate. An estimated bill can look high without a leak.

When to call someone

If the meter keeps moving and you cannot find the cause, a plumber with leak detection equipment can trace it, often without breaking up more than a small area. They give a quote before starting.

Message us with your suburb and what the meter did, and we will put you in touch with a local plumber.

The job behind this: Leak detection.

Questions people ask

Is it normal for the meter to move a little at night?

No. With every tap and appliance off, the meter should be still. An automatic pool filler, a geyser refilling or a garden system can cause movement, so switch those off before you test.

My meter is digital. Does the test still work?

Yes. Note the reading and watch for a leak indicator or flow symbol. Read it again after an hour of no water use.

Will the municipality fix a leak inside my property?

No. Leaks inside your boundary are the owner's cost. The City only deals with its own meter and the pipes outside your boundary.

Related problems

All common problems →

Tell us what is wrong

Takes under a minute. A plumber near your area phones you back and quotes before any work starts. There is nothing to pay to be put in touch.